100 Watt Micro Bass Combo
At an unbelievable 9 by 12-inches and weighing in under 15 lbs, the 100-watt Traynor SB106 combo uses a studio monitor quality 6.5-inch speaker in its solid plywood and metal cabinet to deliver unmatched tone for close monitoring on controlled stages. Fully featured for professional bass players needing a small, lightweight but powerful amplifier solution, the SB106 offers both Passive and Active 1/4-inch Instrument Inputs, selectable Pre or Post EQ XLR DI Output for direct connect to front-of-house mixer and an additional 1/4-inch Speaker Output to drive an additional extension cabinet when necessary (4-ohm minimum).
Built with the practicing musician in mind, the Traynor SB106’s rear mounted 1/4-inch headphone jack defeats the internal speaker for private rehearsal. An 1/8th-inch TRS Auxiliary In jack also on the rear of the amp allows direct connection to any music source making the SB106 your ideal practice companion.
When connected to an external cabinet, you get 200 watts of power from the amp!
Cabinet Impedance (Ohms) | 8 ohms (internal) 4 ohms (external) |
Power @ min. impedance | 100 watts |
Minimum Impedance (Ohms) | 4 |
Burst Power – 2 cycle | 250 watts |
Speaker Configuration | 6.5 / 150W |
Inputs | Passive 0 dB, Active -6 dB |
Aux Input (media) | 1/8-inch TRS Stereo |
Controls | Gain, Bass, Low Mid, High Mid, Treble |
Low Expander, Mute, Ground Lift | |
Line Out (type / configuration) | XLR DI Out (Selectable Pre/Post EQ) |
Line Out Sensitivity (Vrms) | 1 Vms |
Other Features | 1/4-inch Headphone Jack, | 1/4-inch Tuner out |
Dimensions (DWH, inches) | 9 x 9.5 x 12.5 |
Dimensions (DWH, cm) | 22.9 x 24.2 x 11.5 |
Weight (lbs / kg) | 15 / 6.8 |
Specifications subject to change without notice