Guitar
Hover over a product to see a preview and learn more about it.Bass
Hover over a product to see a preview and learn more about it.Acoustic
Hover over a product to see a preview and learn more about it.Keyboard
The AM Custom is the flagship acoustic instrument amplifier in the Traynor line. Designed to be the ultimate "side man's" amp, the AM Custom delivers 225 watts of clean tone through the integrated long-excursion 8-inch woofer and dual neodymium dome tweeters and integrated mixer.
Three input channels, including an XLR microphone in with 48v phantom power for condenser microphones, make the AM Custom an ideal solution for acoustic guitar, dobro, mandolin, violin and other acoustic instruments . Full 4-band EQ's with notch filters to control feedback on three channels ensure maximum versatility. An additional RCA auxiliary input allows direct connection of a CD or MP3 player without tying up a valuable input channel. On board 24-bit digital multi-effect processors with modify controls complete the system.
| Type | Acoustic Instrument Amp |
| Power @ min. impedance (Watts) | 225 |
| Burst Power - 2 cycle | 250 |
| Speaker Configuration - LF (Size / Power) | 150 watt, 2-inch voice coil, 8-inch woofer |
| Speaker Configuration - HF (Size / Power) | 2 X 1-inch Neo Dome Tweeter |
| Frequency Response (Hz +/-3dB) | 50 - 20kHz |
| Hum and Noise (dB) | -98 |
| Inputs | 4 + Aux |
| Channel 1 - Inputs | 1 |
| Channel 1 - Controls | Gain, 4 band tone control, Digital Effects |
| Channel 1 - Switches | Notch |
| Channel 2 - Inputs | 1 |
| Channel 2 - Controls | Gain, 4 band tone control, Digital Effects |
| Channel 2 - Switches | Notch |
| Channel 3 - Inputs | 1 |
| Channel 3 - Controls | Gain, 4 band tone control, Digital Effects |
| Channel 3 - Switches | Notch |
| Channel 4 - Inputs | 1 |
| Channel 4 - Controls | Gain (Post Master Volume Monitor Channel) |
| Channel 5 - Inputs | RCA (pre Master Volume) |
| Master Volume Control | Yes |
| Input Sensitivity (mV) | ch1/100, ch2/100, ch3/100, ch4/100 |
| Master Outputs | No |
| Line Out (type / configuration) | 1/4-inch jack post EFX / XLR Pre EFX |
| Line Out Sensitivity (Vrms) | 1 |
| Effects Volume | Wet/Dry Control |
| Effects Loop / Location | Inserts on Channels 1-3 |
| Effects Footswitch / Function | ch1/2 and ch3 |
| Effects Return Sensitivity (Vrms) | 0.5 |
| Internal Reverb / Effects | 16 modifiable 24 bit Digital Effects |
| LED Indicators | Power, Clip |
| Protection | Effects Input Limiter, Clip Limiter |
| External speaker output / location | No |
| Headphone Jack | No |
| Dimensions (DWH, inches) | 12.5 x 20 x 13 |
| Dimensions (DWH, cm) | 50.8 x 32 x 33 |
| Weight (lbs / kg) | 35 / 15.9 |
| Specifications subject to change without notice |
...Read More
- Three Input Channels
- Additional Auxiliary RCA CD/MP3 Input
- 48v Phantom Power on Channel Three (Mic In) for Condenser Microphones
- 225-Watts Total Power
- 8-Inch Woofer (with 2-Inch Voice Coil)
- Two 2-Inch Neodymium Dome Tweeters (Angled for Enhanced Directivity)
- Shared 24bit Digital Effects on Channels 1 & 2 (Footswitchable EFX Defeat Channel 1 & 2)
- Separate Footswitchable 24-Bit Digital Effects on Channel 3 (Mic In)
- XLR Pre-EQ Di Output with Ground Lift
- Post-EQ Line Output
- Solid Plywood Cabinet Construction
- All-Metal Grille Protects Speaker Components
